CS Power
CS Power Pure Sine Wave Solar Inverter
Characteristics
Powerstar PV Low Frequency Pure Sine Wave Inverter is from 500W to 10000W, DC12V-72V, AC 110V/220V/230V, 50Hz or 60Hz, LCD indicators display.
Off grid solar inverter with pure copper transformer, peak power three times, with built-in DC Charger 35/70Amp, Charger current adjustable, UPS Function.
Advantages:
*LCD digital display show voltage, load and battery info in real time.
*Peak power is three times of rated power.
*Can work with inductive load such as air conditioner, motor door and so on.
*Pure sine wave output, available for sensitive load.
*4-step progressive charging, 7 battery type selector.
*Fast and powerful charger with 35A and 70A.
*Accept generator’s energy output.
*High power factor 0.9, low power consumption.
*Automatically transfer between battery and line modes.
*Microprocessor control guarantees high reliability.
*Bypass without battery connected.
*Remote control function.
*Protection against: Over load, over temperature, over charging, low battery
*Reverse connection (optional by hard connector), Blackouts
Application
Powerstar Low Frequency Pure Sine Wave Inverter is from 500W to 10KW, DC12V-72V, AC 110V/220V/230V, 50Hz or 60Hz, LCD indicators display.
Off grid solar inverter with pure copper transformer, peak power three times, with built-in DC Charger 35/70Amp, Charger current adjustable, UPS Function.
It can work with both solar and home (airconditioner, freezer, printer, generator, fans, lights, TV, computer and so on).
Specification
| MODEL |
PV1000 |
PV1500 |
PV2000 |
PV3000 |
PV4000 |
PV5000 |
PV6000 |
||||
| Nominal Power |
1000W |
1500W |
2000W |
3000W |
4000W |
5000W |
6000W |
||||
|
AC Input |
|||||||||||
|
Phase & waveform |
Single phase & Pure Sine Wave |
||||||||||
| Voltage |
110/120/130VAC or 220/230/240VAC |
||||||||||
| Acceptable Voltage |
95-126VAC or 194-253VAC±4% |
||||||||||
| Low Line Disconnect |
85VAC±4% or 184VAC±4% |
||||||||||
| Low Line Re-connect |
95VAC±4% or 194VAC±4% |
||||||||||
| High Line Disconnect |
136VAC±4% or 263VAC±4% |
||||||||||
| High Line Re-connect |
126VAC±4% or 253VAC±4% |
||||||||||
| Frequency |
50Hz:41-54Hz 60Hz:51-64Hz |
||||||||||
|
AC Output |
|||||||||||
| Phase & waveform |
Single phase & Pure Sine Wave (bypass mode sync to input) |
||||||||||
| Voltage |
110/120/130VAC or 220/230/240VAC±10%rms (bypass mode sync to input) |
||||||||||
| Frequency |
50Hz±0.3Hz 60Hz±0.3Hz (bypass mode sync to input) |
||||||||||
| Peak Power |
3 times of rating power |
||||||||||
|
Short Circuit Protection |
Yes, shutdown after 10ms |
||||||||||
| Power Factor |
0.9-1.0 |
||||||||||
|
DC Input |
|||||||||||
| Battery Voltage |
12VDC or 24VDC or 48VDC |
||||||||||
|
Minimum Start Voltage |
10VDC or 20VDC or 40VDC |
||||||||||
| Low Battery Alarm |
10.5±0.3vdc or 21±0.6vdc or 42±1.2vdc |
||||||||||
|
Low DC input Shut-down |
10±0.3vdc or 20±0.6vdc or 40±1.2vdc |
||||||||||
| High DC input Alarm & Fault |
16±0.3vdc or 32±0.6vdc or 64±1.2vdc |
||||||||||
|
High DC input Recovery |
15.5±0.3vdc or 31±0.6vdc or 62±1.2vdc |
||||||||||
|
MAX Charger Current |
20A/35A/ 50A/75A/90A(According to the Inverter model) |
||||||||||
|
System parameter |
|||||||||||
|
Battery Mode Efficiency |
>85% |
||||||||||
|
Line Mode Efficiency |
>96%Battery |
||||||||||
|
power saver |
Load <=25W (Enabled on “P/S auto” setting of Remote control) |
||||||||||
|
Audible Alarm |
Sounding when the heat sink’s tem is over 100℃ and shutdown after 30 seconds. |
||||||||||
|
Over Load Protection |
110%<load<150%, beeps="" 0.5s="" every="" 1s,="" and="" fault="" after="" 60s.<="" font=""> Load>150%, beeps 0.5s every 1s, and Fault after 20s. |
||||||||||
|
Protections |
low battery、over charging、over temp、over load |
||||||||||
|
Communications |
RS-232/USB/SNMP(custom-made) |
||||||||||
|
Operating Environment |
0-40℃,0-90%RH(non-condensing) |
||||||||||
|
Audible Noise |
<60dB |
||||||||||
|
Net Weight(KG) |
16kg |
18kg |
20kg |
25kg |
39kg |
42kg |
49kg |
||||
|
Dimension L X W X H |
470 X223 X185mm |
650 X223 X185mm |
|||||||||
