TrippLite

TRIPPLITE APSX1012SW 1000W PowerVerter APS 12VDC 230V Inverter/Charger with Pure Sine-Wave Output, Hardwired

Description

Portable 1000W power source for power tools, computers, audio/video components and other sensitive electronics as a vehicle inverter, standalone AC power source or extended-run UPS. Ideal for mobile, emergency and remote sites.

Delivers pure sine-wave 230V AC power from AC or DC source
1000W continuous output power; 2000W peak power
Auto-transfer switching option for UPS operation
Protects against blackouts, surges and EMI/RFI line noise
Rugged steel housing resists moisture and impact

Features

Reliable Power for Mobile, Emergency and Remote Sites

Generates 230V pure sine-wave power from 12V battery bank
Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics
Designed for easy installation in RVs, fleet vehicles and emergency vehicles
Functions as vehicle inverter, standalone AC power source or extended-run UPS
Unlimited runtime with variety of user-supplied batteries

Pure Sine-Wave Power for Normal and Peak Power Demands

1000W of continuous power
2000W of peak power to accommodate surge power demands during equipment startup and cycling
Automatic overload detector, built-in cooling fan and resettable AC circuit breakers protect unit from damage
High-current DC input terminals for simple hardwired installation

Automatic Transfer Switching

Transfer relay switches to inverter power during blackout in 16.6 ms
DIP switches configure high and low voltage auto-transfer

3-Stage 4/40A Selectable Battery Charger

Serves as battery charger when external 230V AC power is supplied and powering connected equipment
Protects battery from overcharging and overdischarging
Low-battery protection prevents excessive battery depletion
DIP switches configure wet/gel charging profiles

External Ports

Battery temperature port allows connection of optional remote battery temperature sensor, such as Tripp Lite’s APSSWTEMP
RJ45 communication port allows connection of optional remote control module, such as Tripp Lite’s APSRMSW with 32 ft. cord

Easy Operation

LEDs indicate battery voltage, charger and inverter status
On/off button provides one-touch control

Rugged Steel Housing

Resists moisture, vibration, impact and high-humidity environments
Built-in mounting feet for installation on any rigid horizontal surface

SPECIFICATIONS

Specifications

OUTPUT

Frequency Compatibility	50 / 60 Hz
Output Receptacles	Hardwire
Output (Watts)	1000
Continuous Output Capacity (Watts)	1000
Peak Output Capacity (Watts)	2000
Output Nominal Voltage	230V
Output Voltage Regulation	Nominal 230v +/- 5%
Output Frequency Regulation	50/60 Hz (+/- 0.5 Hz)
Overload Protection	Includes 7A input breaker dedicated to the charging system and 7A output breaker for AC output loads

INPUT

Nominal Input Voltage(s) Supported	120/208V 3-PH Wye; 230/400V 3-PH Wye; 120/208V (Split phase L1,L2,N,G)
Nominal Input Voltage Description	170-264V +/- 3%
Recommended Electrical Service	DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 200A minimum battery system fusing is recommended.
Maximum Input Amps / Watts	DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input Connection Type	DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage Compatibility (VAC)	220-240
Voltage Compatibility (VDC)	12

BATTERY

Expandable Battery Runtime	Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC)	12
Battery Pack Accessory (Optional)	98-121 sealed lead acid battery(optional)
Battery Charge	Includes selectable 4~40 amp DC charging system.
Expandable Runtime	Yes

USER INTERFACE, ALERTS & CONTROLS

Front Panel LEDs	Set of front panel LED's display inverter status, charger status, as well as battery voltage status
Switches	The inverter provides a RJ-45 port for optional APSRMSW remote control. RJ45 port operates with standard RS485 interface(APSRMSW sold separately)
Audible Alarm	Audible status indicators 10.5V (low battery)/21V start alarm

PHYSICAL

Shipping Dimensions (hwd / cm)	33.02 x 32.01 x 54.54
Shipping Weight (kg)	16.37
Unit Dimensions (hwd / cm)	18.41 x 22.22 x 45.72
Unit Weight (kg)	14.18
Cooling Method	Fan
Material of Construction	Powder coated Steel
Receptacle Color	Grey
Form Factors Supported	Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)

ENVIRONMENTAL

Relative Humidity	0-95% non-condensing

LINE / BATTERY TRANSFER

Transfer Time (Line Power to Battery Mode)	16 ms. maximum
Low Voltage Transfer to Battery Power	170 VAC (+/- 3%) DEFAULT OR 190V +/-3% (user-selectable)
High Voltage Transfer to Battery Power	264 VAC +/- 3%

SPECIAL FEATURES

Load Sensing	100W
Remote Control Capability	Yes

WARRANTY

Product Warranty Period (U.S. & Canada)	2-year limited warranty
Product Warranty Period (International)	2-year limited warranty
Product Warranty Period (Mexico)	2-year limited warranty
Product Warranty Period (Puerto Rico)	2-year limited warranty