Portable dual-outlet power source for power applications, such as power tools and computers, as a vehicle inverter, standalone AC power source or extended-run UPS. Ideal for RVs, fleet vehicles and emergency vehicles.
- Delivers clean 230V AC power from AC or DC power source
- 1250W continuous output power; 2500W peak power
- Auto-transfer switching option for UPS operation
- Protects against blackouts, surges and EMI/RFI line noise
- Rugged polycarbonate housing resists moisture and impact
Reliable Power for Mobile, Emergency and Remote Sites
- Generates safe, stable, computer-grade 230V AC power from 12V battery bank
- Ideal for powering tools, saws, motors, portable lighting, small appliances and computer equipment in heavy-load conditions
- Designed for easy installation in RVs, over-the-road trucks, fleet vehicles and conversion vans
- Functions as a vehicle inverter, standalone AC power source or extended-run UPS
- Features dual C13 outlets
- Unlimited runtime with variety of user-supplied batteries
Meets Normal and Peak Power Demands
- 1250W of continuous power
- 1875W of reserve power up to 1 hr.
- 2500W of peak power up to 10 sec. to accommodate surge power demands during equipment startup and cycling
- Automatic overload detector, built-in cooling fan and resettable AC circuit breaker protect unit from damage
Automatic Transfer Switching
- Transfer relay switches to inverter power during blackout in 10 ms
- 3-position switch enables Auto, Charge Only or System Off mode
- DIP switches configure high and low voltage auto-transfer
3-Stage 7.5/30A Selectable Battery Charger
- Serves as battery charger when external 230V AC power is supplied and powering connected equipment
- Protects battery from overcharging and overdischarging
- Low-battery protection prevents excessive battery depletion
- DIP switches configure wet/gel charging profiles
Optional Remote Control Capability
- RJ45 communication port allows connection of optional remote control module, such as Tripp Lite’s APSRM4
Front-Panel LEDs
- Indicate AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Rugged Polycarbonate Housing
- Resists moisture, vibration and impact
- Built-in mounting feet for installation on any rigid horizontal surface
- Detachable 2 m C13-to-C14 power cord connects to AC power source
OUTPUT
|
| Frequency Compatibility |
50 Hz |
| Output Receptacles |
(2) Universal outlets |
| Output (Watts) |
1250 |
| Continuous Output Capacity (Watts) |
1250 |
| Peak Output Capacity (Watts) |
2500 |
| Output Nominal Voltage |
230V |
| Output Voltage Regulation |
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%). |
| Output Frequency Regulation |
50 Hz (+/- 0.3 Hz) |
| Overload Protection |
Includes 5A input breaker dedicated to the charging system and 6A output breaker for AC output loads |
|
INPUT
|
| Nominal Input Voltage(s) Supported |
120/208V 3-PH Wye |
| Recommended Electrical Service |
DC INPUT: Requires 12VDC input source capable of delivering 125A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 225A minimum battery system fusing is recommended. AC INPUT: 230VAC |
| Maximum Input Amps / Watts |
DC INPUT: Full continuous load - 125A at 12VDC. AC INPUT: 9.3A at 230VAC with full inverter and charger load (3.3A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions) |
| Input Connection Type |
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection |
| Voltage Compatibility (VAC) |
230 |
| Voltage Compatibility (VDC) |
12 |
|
BATTERY
|
| Expandable Battery Runtime |
Runtime is expandable with any number of user supplied wet or gel type batteries |
| DC System Voltage (VDC) |
12 |
| Battery Pack Accessory (Optional) |
98-121 sealed lead acid battery(optional) |
| Battery Charge |
Selectable 7.5 / 30 amp with 1/2 cycle transfer time |
| Expandable Runtime |
Yes |
|
USER INTERFACE, ALERTS & CONTROLS
|
| Front Panel LEDs |
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences. |
| Switches |
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, auto/remote setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads. |
|
SURGE / NOISE SUPPRESSION
|
| AC Suppression Joule Rating |
1020 |
|
PHYSICAL
|
| Shipping Dimensions (hwd / cm) |
31.75 x 27.94 x 27.31 |
| Shipping Weight (kg) |
11.8 |
| Unit Dimensions (hwd / cm) |
17.78 x 22.23 x 22.86 |
| Unit Weight (kg) |
10.9 |
| Cooling Method |
Multi-speed fan |
| Material of Construction |
Polycarbonate |
| Form Factors Supported |
Mounting slots enable permanent placement of APSX1250 on any horizontal surface (see manual for additional mounting information) |
|
ENVIRONMENTAL
|
| Relative Humidity |
0-95% non-condensing |
|
LINE / BATTERY TRANSFER
|
| Transfer Time (Line Power to Battery Mode) |
10 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications) |
| Low Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual) |
| High Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 272 |
|
SPECIAL FEATURES
|
| Remote Control Capability |
Yes |
|
WARRANTY
|
| Product Warranty Period (U.S. & Canada) |
1-year limited warranty |
| Product Warranty Period (International) |
2-year limited warranty |
| Product Warranty Period (Mexico) |
2-year limited warranty |
| Product Warranty Period (Puerto Rico) |
1-year limited warranty |
|
