Portable 2000W power source for power tools, computers, audio/video components and other sensitive electronics as a vehicle inverter, standalone AC power source or extended-run UPS. Ideal for mobile, emergency and remote sites.
- Delivers pure sine-wave 230V AC power from AC or DC source
- 2000W continuous output power; 4000W peak power
- Auto-transfer switching option for UPS operation
- Protects against blackouts, surges and EMI/RFI line noise
- Rugged steel housing resists moisture and impact
Reliable Power for Mobile, Emergency and Remote Sites
- Generates 230V pure sine-wave power from 12V battery bank
- Ideal for powering variable-speed tools, computers, LEDs, fans, audio/video components and other sensitive electronics
- Designed for easy installation in RVs, commercial and fleet vehicles, emergency vehicles and construction equipment
- Functions as vehicle inverter, standalone AC power source or extended-run UPS
- Unlimited runtime with variety of user-supplied batteries
Pure Sine-Wave Power for Normal and Peak Power Demands
- 2000W of continuous power
- 4000W of peak power to accommodate surge power demands during equipment startup and cycling
- Automatic overload detector, built-in cooling fan and resettable AC circuit breakers protect unit from damage
- High-current DC input terminals for simple hardwired installation
Automatic Transfer Switching
- Transfer relay switches to inverter power during blackout in 10 ms
- 3-position switch enables Auto, Charge Only or System Off mode
- DIP switches configure high and low voltage auto-transfer
3-Stage 6/60A Selectable Battery Charger
- Serves as battery charger when external 230V AC power is supplied and powering connected equipment
- Protects battery from overcharging and overdischarging
- Low-battery protection prevents excessive battery depletion
- DIP switches configure wet/gel charging profiles
External Ports
- Battery temperature port allows connection of optional remote battery temperature sensor, such as Tripp Lite’s APSSWTEMP
- RJ45 communication port allows connection of optional remote control module, such as Tripp Lite’s APSRMSW
Front-Panel LEDs
- Indicate battery voltage, charger and inverter status
Rugged Steel Housing
- Resists moisture, vibration and impact
- Built-in mounting feet for installation on any rigid horizontal surface
OUTPUT
|
| Frequency Compatibility |
50 Hz |
| Output Receptacles |
Hardwire |
| Output (Watts) |
2000 |
| Continuous Output Capacity (Watts) |
2000 |
| Peak Output Capacity (Watts) |
4000 |
| Output Nominal Voltage |
230V |
| Output Voltage Regulation |
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 230 VAC (+/-5%). |
| Output Frequency Regulation |
50 Hz (+/- 0.3 Hz) |
| Overload Protection |
Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads |
|
INPUT
|
| Nominal Input Voltage(s) Supported |
120/208V 3-PH Wye |
| Recommended Electrical Service |
DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended. |
| Maximum Input Amps / Watts |
DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions) |
| Input Connection Type |
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate |
| Voltage Compatibility (VAC) |
230 |
| Voltage Compatibility (VDC) |
12 |
|
BATTERY
|
| Expandable Battery Runtime |
Runtime is expandable with any number of user supplied wet or gel type batteries |
| DC System Voltage (VDC) |
12 |
| Battery Pack Accessory (Optional) |
98-121 sealed lead acid battery(optional) |
| Battery Charge |
Selectable 6/60 amp |
| Expandable Runtime |
Yes |
|
VOLTAGE REGULATION
|
| Brownout Correction |
Brownout transfer point - 170V (+/- 3%) |
| Severe Brownout Correction |
Brownout reset point - 180V (+/- 3%) |
|
USER INTERFACE, ALERTS & CONTROLS
|
| Front Panel LEDs |
Display inverter status, charger status as well as bettery voltage status |
| Switches |
The inverter provides an RJ-45 port for optional APSRMSW retmote control. RJ-45 port operates with standard RS-485 interface(APSRMSW sold separately) |
| Audible Alarm |
Audible Status indicators (see manual) |
|
PHYSICAL
|
| Shipping Weight (kg) |
20.9 |
| Unit Dimensions (hwd / cm) |
18.41 x 22.22 x 55.24 |
| Unit Weight (kg) |
23.21 |
| Cooling Method |
Multi-speed fan |
| Material of Construction |
Powder coated steel |
| Receptacle Color |
Gray |
| Form Factors Supported |
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) |
|
ENVIRONMENTAL
|
| Relative Humidity |
0-95% non-condensing |
|
LINE / BATTERY TRANSFER
|
| Transfer Time (Line Power to Battery Mode) |
10 milliseconds |
| Low Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163, 182, 201V - see manual) |
| High Voltage Transfer to Battery Power |
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264 - see manual) |
|
SPECIAL FEATURES
|
| Load Sensing |
150W ~ 220W |
| Remote Control Capability |
Yes |
|
WARRANTY
|
| Product Warranty Period (U.S. & Canada) |
2-year limited warranty |
| Product Warranty Period (International) |
2-year limited warranty |
| Product Warranty Period (Mexico) |
2-year limited warranty |
| Product Warranty Period (Puerto Rico) |
2-year limited warranty |
|
